FC-100

Flow Measurement

Custom-made Products

Flow Controller

FC-100 series is a liquid flow control system which consists of "FCV-200 Flow sensor + Control valve" and "FCA-100 Controller". FC-100 series is suitable for water and low viscosity liquids.
And it maintains stable flow even supply and/or load varies.

Catalogs and Brochures

FC-100
Download

*Specifications are subject to change without prior notice.

Features

Cost effective flow control system
Space saving;
Flow sensor and control valve are integrated. This saves piping space.
DIN 24 x 48 size Controller saves panel space.
Full open/close type valve is adopted, and can be used as Shut-off valve which has been indispensable.
Drain out of line fluid by air purging possible
Lead-free solder has become reality.
High reliability of electronics
EMC Compatible standard: EN61326-1

Specifications

Control valve (FCV series)

Model	FCV-202A-1/4	FCV-202A-3/8	FCV-205A-3/8	FCV-210A-3/8
Measuring medium	Cooling water or low viscosity liquids (2mPa·s or less) Anticorrosive liquid
Nominal diameter	1/4	3/8
Flow range	0.4 to 2 L/min		0.5 to 5 L/min	1 to 10 L/min
Fluid Temperature	0 to 60°C
Fluid Pressure	0.5MPa max.
Process Connection	Rc1/4	Rc3/8
Accuracy	±3%F.S.

Controller (FCA-100)

Input	Flow sensor: Open collector pulse
Input	External setup signal: DC4 to 20mA , DC1 to 5V , DC0 to 10V
Main indication	5 digit, 7segment LED indication for flow rate or setup, etc.
Status display	3 points LED Alarm indication 2 points(Red) Control indication 1 point(Green)
Output	Flow rate signal: DC4 to 20mA, DC1 to 5V, DC0 to 10V Accuracy: ±1% F.S.
Output	Alarm: Open collector 2 points Abnormal output of valve: Open collector 1 point
Front panel	4 buttons "MODE", "Horizontal movement", "Vertical movement", "ENT."
Power supply	DC24V±10%
Construction	Panel for operation: Weatherproof(Equivalent to IP54)