O3000

Flow Measurement

Differential pressure Flowmeters

ORIFLOMETER

The O3000 flowmeter consists of an orifice plate and a metal tube variable area flowmeter (AM3000). It is designed to measure bypass flow by using a small flowmeter attached to the branch pipe, and thus to enable the measurement of flow rates in large pipes at low cost. The indicators are selectable from the local indication type, electric transmitter type, and electric transmitter type with HART® communication.

Catalogs and Brochures

O3000 Series
Download

*Specifications are subject to change without prior notice.

Features

Cost effective
The measuring method using an orifice plate enables the measurement of flow rates in medium- to large-size main pipes at low cost.
Omni-direction support (except O3□□□- AP)
Supports all directions from bottom to top, top to bottom, left to right, and right to left.
HART® communication
Explosion-proof
Certified by TIIS, KOSHA, NEPSI, ATEX and IECEx.
Indicator protection category: IP67

Specifications

Measuring medium	liquids (up to viscosity 3 mPa·s) gases in general (not suitable for slurry and steam)
Nominal diameter	15A to 300A
Flow range	water (density 1.0g/cm³, viscosity 1.0 mPa·s) 　Max.: 64 to 1000 m³/h (Diff. pressure: 50 kPa) 　Min.: 0.27 to 1.8 m³/h (Diff. pressure: 30 kPa) air (0℃, 1 atm) 　Max.: 1700 to 26000 m³/h(nor) (Diff. pressure: 50 kPa) 　Min.: 5.5 to 53 m³/h(nor) (Diff. pressure: 40 kPa)
Fluid Temperature	−20℃ to 120℃ (general type) −20℃ to 200℃ (high-temperature type)
Fluid Pressure	2 MPa max.
Process connection	Screw connection: Rc tapered female thread and NPT female thread, pipe size: 15 A (1/2") to 100 A (4") Flange connection: JIS5KFF/10KFF·RF/20KRF, ANSI/ASME/JPI class:150/300RF, pipe size: 15 A (1/2") to 300 A (12") Wafer connection: JIS5K/10K/20K, ANSI/ASME/JPI class: 150/300, pipe size: 15 A (1/2") to 300 A (12")
Accuracy	±5% F.S.

O3000

Catalogs and Brochures

Features

Specifications

Contact usProduct Inquiry