contact us

Flow PurgemeterP-510

Purgemeter P-510

P-510 PDF

-Advice for your product selection Catalog PDF

*Specifications are subject to change without prior notice.

The P-510 is a purgemeter for large flow rates with the same face-to-face dimension as the P-200 for small flow rates.

Major Applications

General purpose (large flow rate)

Standard Specifications

Measuring fluid Gases
Liquids
Measuring range
Air :  
Min. 2.5 to 25 L/min (nor)
Max. 60 to 600 L/min (nor)
Air at 0°C,0MPa(1atm)
Water :  
Min. 0.1 to 1 L/min
Max. 3 to 30 L/min
Water with a density of 1.0g/cm³ and viscosity of 1.0mPa·s
·When selecting a flow range, refer to "Index & Quick Reference for P Series Purgemeters" (TG-S0001).

·When selecting a flow range, refer to the standard flow rate table.
Range ability 10:1
Indication accuracy ±5% F.S.
Fluid pressure Max. 0.8MPa
Fluid temperature Max. 120°C (Depends on the gasket material)
Material
Wetted part:  
SCS14/SUS304, SCS14/SUS316
Tapered tube:  
Heat-resistant glass
Gasket:  
Nitrile rubber (NBR)(Max. 80°C)
Chloroprene rubber (CR) (Max. 80°C)
Fluoro rubber (Max. 120°C)
Ethylene-propylene rubber (EPDM)(Max. 80°C)

·The maximum fluid temperature for each gasket material may vary depending on usage and ambient conditions.
Mounting plate: SPCC, C2801P, SUS304
Cover: Acryl
Process Connection Rc: 3/8"(Standard), 1/2", 3/4", 1"
NPT: 3/8", 1/2", 3/4", 1"
SW: 3/8"
VCR: 3/8", 1/2", 3/4"
Flange: 10A,15A(1/2"),20A(3/4"),25A(1")
Mounting Screw (M3) mount on panel front (Standard)
Lock nut mount on panel front (Standard)
Bezel mounting
Panel embedded mounting
Flange connection
With stand
Mass approx. 1.6kg