contact us

Flow PurgemeterP-100

Purgemeter  P-100

P-100 PDF

-Advice for your product selection Catalog PDF

*Specifications are subject to change without prior notice.

P-100 is a standard type purgemeter suitable for measuring both liquids and gases, covering a wide range from built-in use for equipment to purging industrial processes, and is widely used in various industries. PTFE packing is available.

Major Applications

Built-in use for general-purpose equipment (small flow rate)

Standard Specifications

Measuring fluid Gases
Measuring range
Air :  
Min. 0.5 to 5 mL/min (nor)
Max. 5 to 50 L/min (nor)
Water :  
Min. 5 to 50 mL/min
Max. 0.4 to 2 L/min
·When selecting a flow range, refer to "Index & Quick Reference for P Series Purgemeters" (TG-S0001).
·When selecting a flow range,refer to the standard flow rate table.
Range ability 10:1(10:2 for some models)
Indication accuracy ±5% F.S.
Fluid pressure Max. 0.8 MPa
Up to 0.5MPa for models with a PTFE gasket
Fluid temperature Max. 120°C (Depends on the gasket material)
Material Wetted part: SUS304, SUS316
Tapered tube: Heat-resistant glass
Gasket :  
Nitrile rubber (NBR) (Max. 80°C)
Chloroprene rubber (CR) (Max. 80°C)
Fluoro rubber (Max. 120°C)
Ethylene-propylene rubber (EPDM) (Max. 80°C)
PTFE (Max. 120°C)

·The maximum fluid temperature for each gasket material may vary depending on usage and ambient conditions.

Mounting bracket :  
Cover :  
Process Connection Rc: 1/4"(Standard), 1/8"
NPT: 1/4", 1/8"
Mounting Lock nut mount on the panel front (Standard)
Bezel mounting
Panel embedded mounting
With stand
Mass approx. 0.5kg