contact us

Flow Battery Powered Electromagnetic Volume Totalizing MeterETM3070

Battery Powered Electromagnetic Volume Totalizing Meter ETM3070

ETM3070 PDF

*Specifications are subject to change without prior notice.

Capable of maximum 15 years' continuous measurement with an inhouse battery, ETM3070 series electromagnetic volume totalizing meter has attained an eco-friendly and reliable high-performance measurement.
The measuring tube is Lined with Rilsan® widely used for coatings for the inside of city water pipes, the tube with reduced size has significantly increased the accuracy in the domain of low flow measurement.
This flowmeter is applicable for the vast variety of services in water related industries.

Features

  • · The in-house lithium battery allows maximum 15 years' continuous measurement without changing the battery.
  • · The measuring tube made of aluminum die-casting lined with Rilsan® is very resistant to creeping deformation caused by vacuum pressure.
  • · Reducing measuring tube size The measuring tube with reduced size offers high accuracy in low flow measurement with a short upstream straight runs as short as 3D. (D is pipe diameter.)
  • · No earth rings are required with earth electrode equipped as standard.
  • · A touch panel system by an infrared sensor allows you to alter the settings without removing the cover of the flowmeter.
  • · High accuracy of ± 0.5% of reading.
  • · Pulse and status outputs are standardized.
  • · Empty flow detection.

Short Specifications

Measuring fluid Drinking water, Tap water, Raw water, Irrigation water(50μ S/cm or more)
Excitation Square wave
Temperature Fluid: 0 to +70℃ Ambient: -20 to +65℃
Pressure 0 to 1.6 Mpa (But to be within the applicable flange limitation)
Measuring range 0 to 9 m/s Velocity inside pipe
Nominal size 25, 40, 50, 65, 80 100, 125, 150, 200 mm
Process connection Flange
JIS 10K, equivalent to ASME Class150, DIN PN10/16
Wetted part material
Lining: 
Rilsan® coating [Polyamide resin]
Flange: 
Size
25 to 125 mm; Stainless steel (SS316)*2
150 to 200 mm; Stainless steel (SS304)*2
O-ring for sealing between Flange and Measuring tube: 
Silicone rubber
Electrode: 
Stainless steel (SS 304)
Earth electrode: 
Stainless steel (SS 304)
O-ring for sealing of Electrode and Earth electrode: 
Fluorocarbon rubber
*2 Anti-corrosive painting [Except wetted part]
Body material
Measuring tube: 
Aluminum alloy *1
Primary head housing: 
Carbon steel *2
Converter housing: 
Aluminum alloy *2
*1 Rilsan® coating [Polyamide resin]
*2 Anti-corrosive painting [Except wetted part]
Protection class Compact type, Separate type converter: IP66/67
Separate type primary head: IP68 Complying with IEC60529/JIS C0920
Status output Open collector outputs
Accuracy Flow velocity 0.5 m/s or more: ± 0.5 % of reading
Flow velocity less than 0.5 m/s: ± 0.2 % of reading + velocity error ± 0.0015 m/s
Battery Exclusively used lithium battery pack