contact us

Flow Compact Eletromagnetic FlowmeterMAGMAX® EGM1100C

Compact Eletromagnetic Flowmeter MAGMAX<sup>®</sup> EGM1100C

EGM1100C PDF

*Specifications are subject to change without prior notice.

MAGMAX® EGM1100C is the compact type electromagnetic flowmeter with a converter EGC100 mounted integrally on a primary head EGS1000 lined with fluorocarbon resin PFA. MAGMAX EGM1100C enjoys low cost and high performance thanks to the advanced converter, and the light weight and compact primary head.

The flowmeter is equipped with empty flow detection and status monitoring functions of primary head using the enhanced self-diagnosis unit.

Lined with high-quality PFA and equipped with Hastelloy® forelectrodes, MAGMAX® EGM1100C has 8 sizes from 10mm to 150mm. In addition to water services such as city water and waste water treatment, it is widely used for various chemical processes and utilities.
* MAGMAX® is registered trademark of the TOKYO KEISO CO.,LTD.

Features

  • · The high-quality and clear PFA reinforced by the punched plates assures the anti-corrosion, anti-erosion and anti-permeation
  • · High accuracy of ±0.5% of reading
  • · High speed data processing for quick response. Suitable for batch process control and pulsating flow
  • · The extendable excitation system allows applications to much fluid noise such as slurry
  • · The LCD with backlight provides 1 to 3 lines of versatile indication
  • · Equipped with a quick setup function to readily respond to changed flow range, pulse rate, etc. The push buttons allow you to alter the settings without removing the cover of conversion section
  • · 10kHz high-speed pulse output. Capable of responding to short batch processes
  • · Standardized high-performance functions such as bi-directional measurement, double ranges and status outputs including flow rate alarms

Short Specifications

Measuring fluid Liquids (10μS/cm or more, 20 μS/cm or more is required for water)
Excitation Square wave
Fluid temperature -40 to +120°C
Fluid pressure 0Pa(abs) to 1.6MPa
Flow velocity Max.: 0 to 12m/s
Min.: 0 to 0.3m/s
Flow range Max.: 0 to 763 m³/h
Min.: 0 to 0.085 m³/h
Size 10, 15, 25, 40, 50, 80, 100, 150 mm
Process connection Wafer type
JIS10K/20K, ANSI class 150/300, DIN PN16/40
Materials of wet parts Liner: PFA
Electrode: Hastelloy® C22
Earth ring: Stainless steel SS316
Earth ring seal: Fluorocarbon rubber (only size 10 and 15mm)
Materials of body
Measuring tube: 
Stainless steel SS304
Primary head housing: 
Cast iron / Sizes 10 to 40 mm
Carbon steel / Sizes 50 to 150 mm
Converter housing: 
Aluminum alloy
Painting Siloxane coating
Accuracy
Indication and Pulse output: 
±0.5% of reading: For velocity ≥ 1m/s
±0.4% of reading: For velocity < 1m/s
+ velocity error ± 0.001m/s
Current output: 
Additional error of ±0.01mA be added to the accuracy of indication or pulse output.
Indicator Dot matrix LCD With backlight
Changeover (2 screens), One to three lines are displayed at one screen.
Contents of indication; Flow rate, velocity, total flow, conductivity, and coil temperature
Output Current output: 4 to 20mA DC
Pulse output: Open collector pulse
Standard Functions · Customer’s free measuring unit setting function
· Automatic zero adjustment function
· Automatic zero adjustment function
· Bi-directional flow measurement function
· Double range measurement function
· Excitation current frequency switching function
· Self-diagnosis function
· Memory save function for power fail
· Testing function
· Push button setting function
· HART® communication
Power Supply 100 to 230V AC
24V DC
Protection class IP66/67(IEC 60529)