contact us

MENU
Close

Flow Calorie MonitorCDT3000 Series

CDT3000 Series

CDT3000 Series PDF

*Specifications are subject to change without prior notice.

The CDT3000 calorie monitor consists of a pitot tube type flow element with a built-in temperature sensor and a differential pressure instrument equipped with root extraction and calorie calculation functions. By inputting an external temperature signal and calculating temperature difference, it indicates and outputs thermal flow and totalized calorie in addition to flow rate. Applicable pipe size ranges from 20 mm to 450 mm.

Features

  • · Easy installation by welding a 20 mm, 3/4 inch socket on exist ing piping for insertion of CDT3000
  • · Simultaneous measurement of both flow and temperature saves your installation cost
  • · Negligible small pressure loss
  • · Selectable from wide variety of flow meter ranges suitable for your applications
  • · Applicable for both horizontal and vertical pipes
  • · By inputting temperature signal on the fluid feed line it allows thermal flow measurement and totalized calorie calculation to serve as a calorie monitor for your energy conservation
  • · Easy to read with a large LCD display

Short Specifications

Measuring fluid Water, Cold Water, Hot water
Flow Range Max. 150 to 1500 m³/h
Min. 0.9 to 9 m³/h
Fluid Pressure Max. 2.0MPa
(Max. allowable differential pressure: 700kPa)
Fluid Temperature -10 to 80°C
Pipe size 200mm to 450mm
Process Connection R3/4 Male
Power Supply/
Output		 DC24V±10% /
Current output
Pulse output
Alarm output
Material Pitot tube: SUS316
Isolation valve: SCS14
Body: SUS316
Diaphragm: SUS316L
O-ring: NBR
Construction IP65
Accuracy ±5% F.S.