contact us

MENU
Close

Flow Vortex Flow SensorVF-3000

VF-3000

VF-3000 PDF

*Specifications are subject to change without prior notice.

The VF-3000 Flow Sensor offers a cost-effective instrument for the measurement of liquid flow.
A simple and clean design makes the VF-3000 a good choice for the measurement of ultra-pure water, DIW (de-ionized water) in semiconductor manufacturing plants.
Current output model, Pulse output model and Display model with current / alarm outputs are available.
All PFA fused construction version has been added, the VF-3000 is an ideal choice for plant where the extreme cleanness of pipe is required.

Features

  • · Wide flow range enough to cover minimum 0.3 L/min and maximum 150 L/min.
  • · Designed for Cleanness
    Sensor body is made of New PFA (420HP-J). All PFA fused* construction version has been lined up and designed to eliminate the deposit.
  • · No Maintenance Cost
    Since the VF-3000 has no moving parts, no maintenance is needed.
  • · Simple and Compact Design
    The VF-3000 Flow Sensor is assembled with a few pieces of components. The sensor body and Shedder bar (vortex generator) are molded as one component. This design approach has reduced the cost as well as the size and weight of the flowmeter.
  • · CE Marking
    The VF-3000 meets the EMC directive for CE mark.
  • · 3 models are lined-up.
    The function can be selected depending upon the application.
    Display + Current output model
    4 to 20mA output (3-wire), LED indicator, 2 points alarm output
    (Open collector)
    Current output model
    4 to 20mA output (3-wire)
    Pulse output model
    Open collector output (Unscaled pulse)
    • * The flow range of All PFA fused construction version is 0.3 to 2.5 L/min, 0.5 to 4 L/min or 15 to 150 L/min.

Short Specifications

Measuring medium Ultra-pure water, Pure water, Water, Low viscosity chemical liquid
Nominal diameter 3/8" to 1"
Flow range VF-30□0　0.3 to 2.5L/min
VF-30□1　0.5 to 4L/min
VF-30□2　2 to 16L/min
VF-30□3　4 to 40L/min
VF-30□5　15 to 150L/min
Fluid Temperature 0 to 90℃
Fluid Pressure 0 to 0.5 MPa
Process Connection PFA tube end [Standard] or PFA tube fitting [Refer to Table of MODEL Code]
Accuracy ±3% F.S.