-
FlowMeasurement
-
LevelMeasurement
-
Related Instruments
Guidance Download
QR code
* Please scan the QR code with your smartphone to access this website page.
VDT series is the indicator integrated type Wafer-Cone® differential pressure flowmeter; VH series Wafer-Cone® flowmeter and DT series multi digital differential indicator are integrated into one flowmeter.
Its principle is based on the Bernoulli's theorem like orifice flowmeter. The V-cone inside pipe throttles flow and generates differential pressure corresponding flow rate.
The precision cast body made in lost wax process has a simple
and rigid construction. Shorter straight runs and lower pressure
loss than orifice save your construction cost and energy.
Measuring medium | Liquids, Gases (Steam can not be measured) |
---|---|
Nominal diameter | 25A to 100A |
Flow Range | Water : Max. 0 to 119.73 m³/h (at 20°C) Min. 0 to 5.51 m³/h (at 20°C) Air : Max. 0 to 7591 m³/h(nor) (at 0°C, 0.5 MPa) Min.0 to 77 m³/h (nor) (at 0°C, 0 MPa) |
Fluid Temperature | Max. 70°C |
Fluid Pressure | 0.5MPa max. |
Process Connection | JIS10K/20K, ANSI150/300, DIN PN16/40, GB PN1.6/4.0 |
Accuracy | ±1.5% to 2.5% F.S. |
is registered trademarks of , Inc. The flowmeters are designed, fabricated and sold by TOKYO KEISO CO., LTD under the license of McCROMETER, Inc. U.S.A.
FlowMeasurement
LevelMeasurement
Related Instruments
Guidance Download
* Please scan the QR code with your smartphone to access this website page.